AIRBREATHING PROPULSION

The JANNAF 37th Airbreathing Propulsion Subcommittee sessions will discuss technical problems and issues associated with airbreathing propulsion systems for application to missiles, launch vehicles, aerospace planes, and remotely piloted vehicles. These include technology, components, and engines within the turbojet, ramjet, scramjet, and combined cycle families. Session topics may include characterization of system performance, engine cycle analysis and testing, engine design, engine/airframe integration, thermal management, fluid and structural mechanics, advanced engine structures and materials, fuel control systems, and characterization of advanced airbreathing fuels.

APS Mission Areas

Areas of interest included in the Call for Papers are:


Mission Area I: Conventional Ramjet Propulsion

Chair:
Dr. Trevor D. Hedman, NAWCWD / China Lake, CA
Telephone:  (760) 939-4026
Email:          trevor.hedman@navy.mil

  • Ramjets: Welcome are papers describing either experimental or theoretical studies related to solid, liquid, and gaseous (aka ducted rocket) fueled ramjet systems or the constituents thereof. By example, topics at the component level include techniques for mixing enhancement, active and passive control, plume signature reduction, instability and fuel development studies. Authors are welcome to submit papers addressing ramjet and ducted rocket technologies at the component, section, or system level.
  • Mode Transition: Papers that address mode transition either to or from that of conventional ramjet operation, e.g., boost to conventional ramjet or subsonic to supersonic combustion are welcome. Papers should emphasize the technology that assists in this transition.
  • Technologies with a Ramjet Application: Authors are encouraged to submit papers that address technologies applicable to ramjet systems, e.g., manufacturing technologies and fabrication techniques, etcetera. Papers need not be associated with a particular system but should be applicable to materials associated with such vehicles and their corresponding flight environment.

Mission Area II: Scramjet Propulsion

Chair:
Dr. Aaron H. Auslender, NASA LaRC / Hampton, VA
Telephone:  (757) 864-6545
Email:          aaron.h.auslender@nasa.gov

  • Fundamental (CS) and Applied Technology: Fundamental and applied supersonic and hypersonic airbreathing propulsion technology and systems, particularly as related to existing technology development and demonstration programs. Development of scramjet propulsion technologies, whether or not related to a particular program or system, will also be of interest. (Papers in this area will be considered for joint APS/CS sessions.)
Specialist Session

Hypersonic R&D Overview: Abstracts are requested for an overview session reviewing current activities in hypersonic R&D. Technical papers are not required but may be submitted in addition to the presentations. Please indicate your interest in being included in this Specialist Session when completing the Abstract Submittal Form.


Mission Area III: Scramjet Propulsion / Structures

Co-Chairs:
Mr. Jonathan Boston, AFRL / WPAFB, OH
Telephone:  (937) 904-7019
Email:          jonathan.boston@us.af.mil

Dr. Patrick J. O'Hara, AFRL / WPAFB, OH
Telephone:  (937)656-8795
Email:          patrick.ohara.14@us.af.mil

  • Propulsion Structures and Materials: Structures and materials technologies for enhancing and enabling current and future airbreathing propulsion concepts and systems. Topics of interest include: cooled and uncooled propulsion related structures and materials such as engine and nozzle flowpaths, combustion chambers, rotating components, combustor liners, hot ducts, insulation concepts, injectors and nozzles and attachment and joining techniques. Papers on structures and materials that have recently flown, or are planned for flight, on flight vehicles are encouraged.
  • Manufacturing Technologies and Fabrication Techniques: Papers are requested that emphasize manufacturing technologies and fabrication techniques. Papers need not be associated with a particular system but should be applicable to materials associated with such vehicles and their corresponding flight environment. Papers on additive manufacturing applicable to scramjets are also encouraged.
  • Airframe Structures and Materials: Materials development and characterization, and structural concepts, design, test, and validation for airframe applications and components exposed to extreme environments as found in atmospheric high speed or reentry conditions. Topics of interest include: TPS and Hot Structures, materials and structures and related technology for leading edges, exterior acreage surfaces, control surfaces, hot structures, and seals (penetrations). Further topics include: hot and integrated structures; acreage thermal protection systems, including ceramic matrix composites, tiles, blankets, ablators, and metallics; fuel tanks, including cryogenic and hydrocarbon, composite and metallic; leading edges, including active, passive, and heat-pipe-cooled; design and analysis methods; and seals. Papers are also encouraged on structures and materials for flight vehicles, either those that have flown or are planning to fly.

Mission Area IV: Scramjet Component / Engine Testing

Chair:
Dr. G. Douglas Garrard, National Aerospace Solutions / Arnold AFB, TN
Telephone:  (931) 454-3300
Email:          glenn.garrard.ctr@us.af.mil

Papers are solicited for all topics related to both ground and flight testing of scramjet systems. Topics may include, but are not limited to:

  • Ground test facility and flight test range upgrades
  • Characterization and calibration of ground test facility flow fields
  • Effects of vitiated test medium on scramjet system performance and operability
  • Ground and flight test program results and lessons learned
  • Integration and homogenization of ground and flight test data
  • Engine and component test and evaluation techniques for large scale systems for which existing ground test facilities may not exist
  • Instrumentation strategies for performance, operability, thermal management, and durability in ground and flight tests and comparisons between the two
  • Test techniques for transient flight events in ground test facilities
  • Uncertainty assessments including techniques to reduce uncertainty by coupling both experiments and analytical computations

Mission Area V: Combined / Advanced Cycle Propulsion

Co-Chairs:
Dr. Charles J. Trefny, NASA GRC / Cleveland, OH
Telephone:  (216) 433-2162
Email:          charles.j.trefny@nasa.gov

Mr. Glenn W. Liston, AFRL / Arnold AFB, TN
Telephone:  (931) 454-3645
Email:          glenn.liston@us.af.mil

Fundamental and Applied Technology: Combined, combination, and advanced cycle airbreathing propulsion technology and systems. Of particular interest are analytical, numerical, and experimental research regarding: 1) integration of multiple propulsive cycles and mode transitions; 2) methods of broadening the flight Mach number range of gast turbine, ramjet and scramjet cycles; 3) exploration of airbreathing propulsive cycles other than the Brayton cycle; and 4) system-level evaluations and payoff assessments. (Papers in this area will be considered for joint APS/CS sessions.)


Mission Area VI: Small / Expendable Turbopropulsion

Chair:
Mr. Gregory B. Bruening, AFRL / WPAFB, OH
Telephone:  (937) 255-4798
Email:          gregory.bruening@us.af.mil

Basic Technology and System Applications: Small, expendable, and limited-life turbopropulsion technology and vehicle systems related to missiles, drones, and UAVs. Areas of interest include both subsonic and supersonic mission applications. (Papers in this area will be considered for joint APS/CS sessions.)


Mission Area VII: Fuel Technology

Chair:
Dr. Donald K. Phelps, AFRL / WPAFB, OH
Telephone:  (937) 255-7405
Email:          donald.phelps@us.af.mil

Fundamental and Applied Technology: Fuels, propellants and fuel-system catalysts R&D for conventional and advanced cycle airbreathing propulsion, as applied to missiles, launch vehicles, and advanced aircraft for global reach applications. Conventional non-expendable turbine-powered aircraft are excluded from this call. (Papers in this area will be considered for joint APS/CS sessions.)


Mission Area VIII: Component Modeling Simulation

Co-Chairs:
Dr. Mark A. Hagenmaier, AFRL / WPAFB, OH
Telephone:  (937) 255-7325
Email:          mark.hagenmaier@us.af.mil

Dr. Richard L. Gaffney, NASA LaRC / Hampton, VA
Telephone:  (757) 864-7872
Email:          richard.l.gaffney@nasa.gov

  • Data for Propulsion Simulation Code Validation: Papers summarizing data for airbreathing propulsion code validation are requested which summarize new data and/or existing collections of data. The validation data may represent fundamental physics, propulsion system component operation, propulsion system unit problems, or system data. The physical phenomena investigated may include shock boundary layer interactions, multi-phase flow, turbulent flow, combustion, electromagnetic flow interactions or thermal protection systems. Fundamental thermodynamic data on physical properties of fluids including ionized gasses to supercritical fluids are also of interest. (Papers in this area will be considered for joint APS/CS sessions.
  • Methods for Propulsion Component Analysis: Methods suitable for propulsion system design, analysis, optimization and uncertainty quantification are solicited. These methods may be new methods or evaluations of existing methods. The methods may range from CFD simulation methods to integral cycle codes. Methods for efficient and/or accurate modeling of turbulent flow, combustion systems, ionized flow interactions, or multi-phase flow in the subsonic to hypersonic speed range are desired. Another issue of importance is methods for the integration of component models into a larger system simulation. (Papers in this area will be considered for joint APS/CS sessions.)
  • Application of design, analysis, optimization and uncertainty quantification methods and tools to propulsion system components and integrated components. This also includes validation studies for models, methods and tools.

Mission Area IX: Advanced Combustion Control

Chair:
Dr. Aaron H. Auslender, NASA LaRC / Hampton, VA
Telephone:  (757) 864-6545
Email:          aaron.h.auslender@nasa.gov

Fundamental and Applied Technology: Papers are requested to advance active combustion control technology for airbreathing propulsion engines. Combustion control includes issues such as NOx control, pattern factor control, blowoff control, combustion dynamics control, and mode transition in combined-cycle, launch-vehicle propulsion systems, and combustion control on flight systems. Three main areas of particular interest are: the need for CFD codes to incorporate time accurate transient solutions to model actively controlling combustion; the need for sensors and actuators that are robust, responsive, inexpensive, and light enough to be used in flight for active combustion control; and the need to catalogue sources of suitably characterized sensors and actuators to actively control combustion in air breathing propulsion applications.


Airbreathing Propulsion Subcommittee Chair

Mr. Lawrence D. Huebner, NASA MSFC / Huntsville, AL
Telephone:  (256) 544-5246
Email:          lawrence.d.huebner@nasa.gov

Airbreathing Propulsion Subcommittee Deputy Chair

Dr. James W. Weber, AFRL / Eglin AFB, FL
Telephone:  (850) 883-2502
Email:          james.weber.13@us.af.mil

JHU WSE ERG Technical Representative

Mr. Bryan S. DeHoff, Aerospace Technical Services / West Chester, OH
Telephone:  (513) 378-7071
Email:          bryan.dehoff@aerospacetechnic.com